Articulated Cord Delivery System JME 4110

Authors

Corey Milcic, Washington University in St. LouisFollow
Jonathan Olson, Washington University in St. LouisFollow
Kristian Stavri, Washington University in St. LouisFollow
Colin Brady, Washington University in St. LouisFollow

Publication Date

Summer 8-12-2019

Document Type

Final Report

Problem Statement

The device we are proposing to build will be remotely controlled and will be loaded with an extension cord wrapped on a spool at the start point. From there it will be driven to until the cord is fully unwound. It will then be driven back to the start point to have another spool loaded in. The device will then drive back to the end of the first cord. A mechanism on the device will pick up the end of first cord as the device drives over it and connect it to the second cord. From there the device will drive until the second cord is unwound and then return to the start point.

Author's School

School of Engineering and Applied Science

Author's Department

Mechanical Engineering and Materials Science

Class Name

Mechanical Engineering Design Project (UMSL JME 410)

Comments

Senior Design Project for JME 4110.

Recommended Citation

Milcic, Corey; Olson, Jonathan; Stavri, Kristian; and Brady, Colin, "Articulated Cord Delivery System JME 4110" (2019). Washington University / UMSL Mechanical Engineering Design Project JME 4110. 18.
https://openscholarship.wustl.edu/jme410/18